Pairing your device with your mc.brick

How to connect your device with your mc.brick?

You can connect your device throught 3 methods:

  • Bluetooth connection
  • NFC technology
  • Audio jack cable connection
1. Bluetooth connection
  • First , activate your bluetooth on your device and turn on your bluetooth connectivity. Please make sur that your device is “visible” or “discoverable”. (For more information about how to enable Bluetooth on your device, please refer to the user guide provided by the manufacturer of this device.)
  • Then turn on your mc.brick by switching the button on the back of the speaker to “On”. Wait approximately 10sec. When the led indicator is flashing red and blue, mc.brick is in pairing mode.
  • Search for mc.brick by choosing ”add new Bluetooth device” or “setup Bluetooth device” on your device.
  • Select the device named mc.brick. This will connect your speaker to your Bluetooth device.
  • Once paired successfully, the LED indicator lights will turn blue and blink twice every 3 seconds.
  • This manipulation will be realized only the first time. Indeed, subsequently, your device and mc.brick will connect automatically without any manipulation.

    2. NFC technology
    • First , activate NFC technology on your device.
    • Then turn on your mc.brick by switching the button on the back of the speaker to “On”. Wait approximately 10sec. When the led indicator is flashing red and blue, mc.brick is in pairing mode.
    • Approaching your device to the left top of your mc.brick. You must keep a distance of less than 10cm between your device and mc.brick.
    • Please wait for few seconds. Your device and mc.brick will connect automatically.
    • A notification of connection will appear on your phone. Your products are connected and you can remove your phone from mc.brick and use it normally.
    3. Audio jack cable connection

    If your device is not Bluetooth enabled, you can still enjoy your mc.brick by using the Line-in Audio Jack and by connecting mc.brick with the included audio jack cable to any device with a 3.5MM standard audio jack. Once done, mc.brick can be used as a wired speaker.

Leave A Comment?